Comments on: Dead motor!! https://www.projectbluesphere.com/2009/08/03/Dead-motor/ Land and Sea Sun, 09 Aug 2009 01:55:04 +0000 hourly 1 https://wordpress.org/?v=6.7.2 By: joepolach@comcast.net https://www.projectbluesphere.com/2009/08/03/Dead-motor/#comment-954 Sun, 09 Aug 2009 01:55:04 +0000 #comment-954 Thanks for your inspiration. I dream to sail the world in the near future and I will, despite friends’ inquiries regarding the fact I have never sailed. Seems like a minor problem to me. I will learn. Any advice for dreamers would be appreciated.

Joe.

]]>
By: Alex https://www.projectbluesphere.com/2009/08/03/Dead-motor/#comment-953 Tue, 04 Aug 2009 22:44:37 +0000 #comment-953 manumit,

Thanks for the info but it is already in a box. Sounds like a good idea however. Cool not to burn out the starter.

It really should have started tho. I think one cylinder motors are a bit more finicky as there are no other cylinders to compensate.

I’m hoping to get it going at some point and hook it up to an alternator.

]]>
By: manumit https://www.projectbluesphere.com/2009/08/03/Dead-motor/#comment-952 Tue, 04 Aug 2009 21:21:37 +0000 #comment-952 years ago i bought a hurrican boat yamar 50hp. would not start, crud in the rings not enough comprestion mechanics said if we could get her running rings would onsnag , but she would not start. a fellow at the rat island yaught club at gibsons dry dock st. johns river polaka florida , used a washing mashine motorand a belt plugged it in and with in 5 minutes the motor created enough heat to cause compression to start . the motor has run fine evermore. ian on stormy wheather

]]>
By: Alex https://www.projectbluesphere.com/2009/08/03/Dead-motor/#comment-951 Tue, 04 Aug 2009 16:17:37 +0000 #comment-951 Gary,

tried that. Hows liv’n back in the states?

-Alex

]]>
By: svplanb4@aol.com https://www.projectbluesphere.com/2009/08/03/Dead-motor/#comment-950 Tue, 04 Aug 2009 07:54:26 +0000 #comment-950 alex…try starting fluid in the air intake …..if it fires or sounds like it is trying to bind up your problem is air in the injector lines….life is good gary

]]>